REPLAY 1.1 — free update for White, Black SE and Gen2 HDMI
Your activation and existing PIN carry over. Updates and re-downloads do not use your download allowance. Menu settings return to defaults; check FRAME RATE, BITRATE and the clock afterwards.
White: keep TAPELESS.PIN and copy only powerplay.bin. Black: back up TAPELESS.TXT before formatting the card in PowerPlay, restore it afterwards, and copy only SigmastarUpgradeSD.bin.
One license. One PowerPlay. Follow the guide for your hardware, then activate with your INVIZ order number and purchase email.
Limited preview release — final device testing continues. Final device testing is in progress. Gen2 HDMI has not yet been tested on a physical unit. This guide describes REPLAY 1.1; earlier INVIZ firmware uses different installation steps.
Download REPLAY from your order email.
After payment, open the REPLAY download link in your order confirmation email. Choose the package that matches your hardware: White PowerPlay, Black PowerPlay without HDMI, or Clear / Black PowerPlay with HDMI. Your matching installation guide appears below the download cards. All packages are standard ZIP files with no ZIP password.
Your order confirmation contains the order number you need for activation. Each license activates one device. The 1.1 update and re-downloads are free and do not use your download allowance. Choose the ZIP that matches your PowerPlay hardware. Your download history is saved for future updates. Gift recipients can select Gift ID and use their matching email on the download page. Save your ZIP for reinstalls on the same device.
This public page contains installation instructions. Open your REPLAY download page and verify your order number and purchase email to get the software. If you need help finding that email, contact support@invizworldwide.com with your order number.
Before installing Back up your recordings and fully charge your PowerPlay. Keep power reliable throughout the update. Formatting erases the card. Extract the ZIP on your computer; do not copy the ZIP itself to the card.
WHITE / IMMERSIONRC
Original white PowerPlay
Use the White package for the original white ImmersionRC PowerPlay. It does not fit black models.
replay-1.1-white-powerplay.zip
Includes powerplay.bin, a 1.1 update readme and the original installation and features PDF.
Use a FAT32 SD card. Copy only powerplay.bin from the extracted package to the card’s top level. Keep the file name unchanged and do not put it inside a folder.
Insert the card and power on. Wait for the update to finish. Do not interrupt power or remove the card.
The device restarts or goes dark. Power it on again if needed. REPLAY deletes the update file automatically.
When updating, keep TAPELESS.PIN; your activation carries over. On a first installation, the NOT ACTIVATED screen shows a QR code and an eight-character device code. Continue with activation below.
Entering your six-digit PIN
Turn the wheel: change the number. Press the wheel: move to the next digit. Tap power: go back one digit.
REPLAY offers 30P/25P and 60P/50P in CAMERA SET → FRAME RATE. PAL or NTSC input determines the available pair. A new frame-rate setting applies to the next recording.
BLACK / DIRECTFPV · AGS
Black PowerPlay SE / Gen2 HDMI
Download the ZIP for your hardware. Each Black ZIP contains one matching SigmastarUpgradeSD.bin, INSTALL and FEATURES instructions, and a checksum. The two firmware files have the same name but are different and must not be mixed.
Without HDMI — SE (AV only)replay-1.1-black-powerplay-se-av-only.zip
Clear / Black with HDMI — Gen2 HDMIreplay-1.1-black-powerplay-gen2-hdmi.zip
SE (AV only): AV input, no HDMI input socket. Gen2 HDMI: the device also has an HDMI input socket.
Back up your recordings. Format the SD card in PowerPlay using its FORMAT SD menu, then switch the device off. A card formatted only on a computer may not be read.
Extract your matching ZIP. Open its Replay 1.1 - black PowerPlay SE (AV only) or Replay 1.1 - black PowerPlay Gen2 HDMI folder; it contains only the update for that model.
Copy only SigmastarUpgradeSD.bin from that folder to the card’s top level. Keep the name unchanged. REPLAY uses this one file; do not add the IPL, IPL_CUST or UBOOT files from an older INVIZ upgrade.
Insert the card and power on. Wait until the update finishes and PowerPlay starts by itself. Do not interrupt power or remove the card while it is updating.
REPLAY deletes its update file automatically. When updating, keep TAPELESS.PIN; your activation carries over. On a first installation, the NOT ACTIVATED screen shows a QR code and device code. Continue below.
Entering your six-digit PIN
Rocker up / down: change the number. Press the rocker: move to the next digit. Tap MENU: go back one digit.
On Gen2 HDMI, the progressive FRAME RATE modes apply to the AV input only. Black-model FRAME RATE and BITRATE changes take effect after restarting PowerPlay.
ALL SUPPORTED MODELS
Activate your PowerPlay
Scan the QR code on the device. It opens the INVIZ activation page with your device code filled in. You can also open the page below and enter the code manually.
Enter your INVIZ order number and purchase email to get your six-digit PIN. No account or password is needed.
Enter all six digits on PowerPlay, including any leading zero, using the controls for your model above.
After the sixth digit, PowerPlay checks the PIN, shows ACTIVATED and starts.
Each unit purchased activates one device. Keep your original order number, purchase email and device code for future PIN recovery.
Keep the activation file on your card. White PowerPlay saves TAPELESS.PIN. Black PowerPlay saves TAPELESS.TXT. Leave the matching file on the card when updating so the same device can activate itself again.
Lifetime updates, new cards & PIN recovery
Your licensed PowerPlay includes lifetime free software updates. Use the download access supplied with your purchase, extract the new package and copy the matching update file to the card just as above. Keep the activation file on the card.
If the card is replaced or formatted, PowerPlay may ask for the PIN again. Return to the activation page with your original order number, purchase email and the same device code. Retrieving the same PIN does not use another license.
Updates reset menu settings. Check the clock, frame rate, bitrate and recording preferences after updating.
After installing
Check MENU → OTHERS → VERSION for REPLAY 1.1. Record a short clip with motion and sound, check playback, then restart to confirm your settings are saved.
Wrong PIN or a black screen after updating
After ten incorrect PIN attempts, switch PowerPlay off and on to try again. Check the device code and use the PIN for that same device.
For Black PowerPlay, if the update has reached 100% and remains on that screen or goes black, wait one minute before removing the card and restarting. Do not remove the card during an unfinished update. If the device still does not start, contact support before trying another firmware file.
Final sale · permanent activation REPLAY digital licenses are non-refundable, except where required by law. Each activation is permanently linked to its original email and device. Transfers and rebinding are not available. Reinstalling on the same device or retrieving its existing PIN does not use another license.
Need help? Contact support@invizworldwide.com with your order number, device model and the code or a photo of the screen. Do not send your PIN.
Choosing a selection results in a full page refresh.
